Stopping And Securing The Vehicle; Location Of The Spare Tire And Tools; Removing The Jack And Tools - Ford Lincoln Navigator Owner's Manual

Roadside Emergencies

Stopping and securing the vehicle

1. Park on a level surface, activate
the hazard flashers and set the
parking brake.
2. Place the gearshift in P (Park)
and turn the engine off.

Location of the spare tire and tools

The spare tire and tools for your vehicle are stowed in the following
locations:
Item
Spare tire
Jack tools and jacking instructions Under the access panel located in

Removing the jack and tools

1. Open the liftgate, then locate the
access panel on the floor behind the
3rd row seat. Unlatch and remove
the panel.
2. Remove the jack and tools
assembly tray from the
compartment by turning the
wing-nut counterclockwise to relieve
tension against the jack assembly
tray. Remove the bag from the jack
and tool assembly tray by loosening
the strap.
Note: Pay close attention to the orientation of the bag, because it will
have to be reinstalled after changing the tire.
3. Unsnap the wheel lug nut wrench, jack extension and handle from the
plastic tray. Remove the jack and instruction sheet from the tray
assembly.
298
2009 Navigator (nav)
Owners Guide, 1st Printing
USA (fus)
Location
Under the vehicle, just forward of
the rear bumper
the floor compartment behind the
rear seat