Smoothing; Distinguish Thin Lines; Do Not Print Blank; Toner Save - imagistics cm4530 Printing Manual

•
SUPPLEMENT:

— Smoothing

The smoothing mode can be set using the following option.
Example: The command to set the smoothing mode is "lp –o smoothing=on filename".

— Distinguish Thin Lines

The thin line limit mode can be set using the following option.
Example: The command to set the thin line limit mode is "lp –o thinlinelimit=on filename".
— Do not Print Blank Pages
The Blank page mode can be selected using the following option.

— Toner Save

The toner save mode can be set using the following option.
Example: The command to set the toner save mode is "lp –o tonersave=on filename".
Printing Guide — Printing from UNIX
How the equipment performs printing for an invalid department code print job, which
no department code or invalid department code is specified, varies depending on
the Department Code Enforcement setting that can be set from Imagistics Printer
Utility Administrator mode. When the Department Code Enforcement is enabled,
the invalid department code print job will be stored in the invalid department code
print job list without printing. When the Department Code Enforcement is disabled,
the invalid department code print job will be printed.
Option Value Alternate
Value
smoothing= ON
on
smoothing= OFF
off
Option Value Alternate
Value
thinlinelimit= ON
on
thinlinelimit= OFF
off
Option Value Alternate
Value
blankpage=0
blankpage=1
Option Value Alternate
Value
tonersave=on ON
tonersave=off OFF
Description
Set the smoothing mode.
Cancel the smoothing mode.
Description
Set the thin line limit mode.
Cancel the thin line limit mode.
Description
Set the blank page mode (disable Do not Print Blank Pages).
Cancel the blank page mode (enable Do not Print Blank Pages).
Description
Set the toner save mode.
Cancel the toner save mode.
299