Right Margin; Top Margin; Text Length; Banner Page - imagistics cm4530 Printing Manual

— Right Margin

The right margin position can be specified with the following option.
If the right margin is set to the left of the left margin or if it is set to a position wider than the log-
ical page it will be ignored. The right margin is specified in columns from the left margin. A
negative value will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the right margin to fifty columns is "lp –o rm=50 filename".

— Top Margin

The top margin position can be specified with the following option.
If the top margin is set too high or too low part of the text may not appear due to the printer's
unprintable region. The top margin will be ignored if it is set to a value greater than the printer's
logical page length. Setting this value may affect the number of lines specified using the page
length option.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the top margin to ten lines is "lp –o tm=10 filename".

— Text Length

The text length can be specified using the following options.
If the text length is set too high, the part of the text may not appear due to the printer's unprint-
able area. The text length will be ignored if it is set to a value greater than the printer's logical
page length minus the top margin. The text length is specified in rows from the top margin. Set-
ting this value may affect the number of lines specified using the page length option.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the text length to 40 lines is "lp -o tl=40 filename".

— Banner Page

A banner page is automatically generated for each file in each job. The banner page contains the
following items. The banner page is always sent as a PCL5e job.
•
•
•
•
304
Option Value Alternate
Value
rm=value
Option Value Alternate
Value
tm=value
Option Value Alternate
Value
tl=value
The name of the user that submitted the print job.
The job ID number and from which workstation it was submitted.
The title of the job. This title can be specified using the "-t" option. The same title is used for
every file within a job. The default title is controlled by the "lp" command.
A list of the options that were specified to print the job.
Description
Set the right margin to value columns.
Description
Set the top margin to value lines.
Description
Set the length to value lines.
Printing Guide — Printing from UNIX