Installation For Parallel Printing Using The Installer - imagistics cm4530 Printing Manual

•
•

Installation for Parallel Printing Using the Installer

Installing the client software for parallel printing
The following describes an installation on Windows 2000. The procedure is the same when other
versions of Windows used.
•
REQUIREMENT:
Printing Guide — Installing Client Software for Windows
Using Plug and Play
When this equipment is connected to a parallel port of Windows 98, Windows Me, Windows
2000, Windows XP, and Windows Server 2003 computers, the Plug and Play Wizard auto-
matically starts. While you can install a printer driver using this method, other client soft-
ware cannot be installed.
P.29 "Installation for Parallel Printing by Plug and Play"
Using Add Printer Wizard
When you want to install different printer drivers after installing a printer driver using Plug
and Play, or when you want to install the printer drivers without using the installer or Plug
and Play, install the printer drivers using the Add Printer Wizard.
P.38 "Installation for Parallel Printing by Add Printer Wizard"
You must log into Windows as a user who has the "Administrators" or "Power Users"
privilege when using Windows NT 4.0, Windows 2000, Windows XP, or Windows
Server 2003.
1.
Insert the Client1 CD-ROM into the CD-ROM drive.
• The installer automatically starts and the Choose Setup Language
dialog box appears.
• If the installer does not automatically start, double-click "Setup.exe" in
the Client1 CD-ROM.
2.
Select your language and click [OK].
• The InstallSheild Wizard dialog box appears.
25