Display Messages At Startup - Intermec EasyCoder F4 Installation & Operation Manual

Chapter 4 Starting Up
Display Messages
at Startup
28
When the power is switched on, the printer is initialized. The
progress of the initialization is indicated by an increasing number of
colons on the lower line in the display:
Initializing
:::
The type of startup file running in the printer is indicated by
the message shown in the display window immediately after
initialization.
A. Intermec Shell Startup Program (standard printers)
ENTER=SHELL
5 sec. v.4.4
4 sec.
3 sec.
Refer to Chapter 9 for more information on Intermec Shell. The
digits in the lower right corner of the display window indicate the
version of Intermec Shell.
B. Custom-Made Application Program (non-standard printers)
Any other display messages than those illustrated above indicates
that the printer is either running some custom-made, non-standard
application program, or that some error has occurred.
Intermec EasyCoder F4 – Installation & Operation Ed. 3
v.4.4
v.4.4
2 sec. v.4.4
1 sec. v.4.4