Feature Operation; Account Code Entry - Toshiba PERCEPTION 4000 User Manual

Chapter 2
PERCEPTION 4000
Forced Account Code Entry:
1. Dial the desired destination
number.
2. Enter the desired account
code.
3. Wait for the call to be
established.
Optional Account Code Entry:
1. Establish a call (either
outgoing or incoming).
2. Press the hookswitch.
3. Enter the Account Code
access code.
4. Enter the desired account
code.

ACCOUNT CODE ENTRY

Account codes provide a method of categorizing incoming and outgoing
calls on the PERCEPTION 4000 system's Station Message Detail
Recording (SMDR) report. Categories can designate specific individuals
or companies so that calls can be easily billed. Your telephone may be
required to enter an account code either for all outgoing calls or for all
outgoing toll calls (Forced Account Code entry). If your telephone
requires account code entry, your call will not be completed until an
account code is entered. If your telephone does not require account code
entry, codes can be entered voluntarily during incoming or outgoing calls
(Optional Account Code entry).
Recall dial tone will indicate that account code entry is required.
Listen for success tone.
If the system does not accept the entered account code, you will hear
reorder tone.
If all outgoing trunks are busy, the call can be camped-on to the trunks as
with a normal call. The account code does not need to be re-entered
when a trunk becomes idle.
The connected party will be placed on "soft hold."
Listen for recall dial tone.
Listen for success tone.
If the system does not accept the entered account code, you will hear
reorder tone.

FEATURE OPERATION

2-1