Call Waiting Transfer - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Transfer a Waiting Call:
1. Establish a two-way
connection.
2. After hearing the Call Waiting
tone, press the hookswitch
and enter the Swap access
code.
3. Press the hookswitch and dial
the number of the station that
is to receive the new call.
4. Hang up; or wait until the party
answers, announce the
transferred call, and then hang
up.
2-12
4. You cannot form a three-way conference with the originally-held
party and the new call.
5. After accessing a camped-on call, you can use the Call Waiting
Transfer feature to transfer one of the calls to another destination.

CALL WAITING TRANSFER

The Call Waiting Transfer feature allows you to place a current call on
"soft hold" to answer a waiting call, and then transfer the new call to
another station.
Your current call will be automatically placed on "soft hold" and you will
be connected to the new caller.
Listen for ringback tone.
The held call will recall your station.
NOTES:
1. You cannot place calls to a paging device or dictation machine, or
calls to/from an attendant, on hold.
2. If you hang up at any time while you have a call on "soft hold," the
call will immediately recall your station.
3. Instead of transferring the new call, you can disconnect the call and
then return to the held party by pressing the hookswitch twice (the
first press of the hookswitch will disconnect the new call and the
second press will reconnect you to the original party).
4. You cannot form a three-way conference with the originally-held
party and the new call; however, a three-way conference can be
formed with the new call and the transfer destination party.
FEATURE OPERATION