Camp-On Transfer - Toshiba PERCEPTION 4000 User Manual

Standard telephone
Hide thumbs Also See for PERCEPTION 4000:
Table of Contents

Advertisement

PERCEPTION 4000
To Manually Cancel a
Registered Camp-on:
1. Press the hookswitch to place
any current call on "soft hold."
...or...
Go off-hook.
2. Enter the Camp-on
Cancellation access code.
2-14
When placing a call on "soft hold," listen for recall dial tone.
Listen for success tone.
NOTES:
1. When reaching a busy destination, alternatives to the activation of
Camp-on are to either hang up or to register a callback message.
2. In the case of a station-to-station call, the busy party may receive a
Call Waiting signal to indicate that you have camped-on to the busy
line. The called party can then access your call.
3. While waiting for a camp-on callback, you can make additional calls;
however, the callback will not occur until your station is idle.
4. If a station camp-on callback is not answered within a predetermined
time period, the camp-on and callback will be canceled. There will
not be an additional callback. If a trunk camp-on callback is not
answered within a predetermined time period, there may be up to
two additional callback attempts.
5. A camp-on callback can only be answered at the station from which
the camp-on was originated. Callbacks cannot be picked up from
secondary line appearances or via any Call Pickup feature.
6. You cannot camp-on to a station that has Do Not Disturb registered.
If you register Do Not Disturb after initiating an on-hook camp-on,
your station will still receive the camp-on callback.
7. Your telephone can initiate only one camp-on (either station or trunk)
at a time.
8. If an incomplete camp-on is not manually canceled, it will be
automatically canceled by the system after a predetermined time
period.

CAMP-ON TRANSFER

When you have a party on "soft hold" at your station and attempt to call a
busy third party (to use Consultation Hold or Three-way Calling), you can
camp-on to the called line. At this stage, you can drop out of the
connection to automatically camp the held call onto the busy line. When
the busy line becomes idle, the held call will ring the idle station.
FEATURE OPERATION

Advertisement

Table of Contents
loading

Table of Contents