Swap; Three-Way Calling - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000 PERCEPTION 4000
To Swap a Connected Call and a
Waiting Call:
1. After hearing the Call Waiting
tone, press the hookswitch
and listen for recall dial tone.
2. Enter the Swap access code.
3. To alternate between the held
call and the new call, continue
to press the hookswitch, listen
for recall dial tone, and enter
the Swap access code.
NOTES:
1. You can place a current call on "soft hold" by pressing the
hookswitch, and then place a call via Speed Calling. To return to the
held call, simply hang up and the held call will recall to your
telephone.
2. While using Speed Calling, you will hear reorder tone if you enter an
invalid Speed Calling access code or index number; if your station is
restricted from accessing the call destination; or if your station is
restricted from the route used for the call.

SWAP

The Swap feature allows you to automatically swap calls when you are
connected to a party and receive a Call Waiting indication.
The current caller will be placed on "soft hold."
You will be connected to the waiting call.
Each time, the two calls will be switched.
NOTES:
1. You cannot place calls to a paging device, or calls to/from an
attendant, on hold.
2. If you hang up at any time while you have a call on "soft hold," the
call will immediately recall your station.

THREE-WAY CALLING

You can connect to two parties simultaneously to form a three-way
conference. Once connected, you can drop one par ty from the
conference and maintain a connection with the other party. You can
perform a call conference consisting of more than three members only if
your station has the Eight Party Conference call allowance. Refer to Eight
Party Conference for operational procedures regarding this feature.
FEATURE OPERATION FEATURE OPERATION
2-31