Door Lock - Electrolux W365H Service Manual

Service
Manual

DOOR LOCK

The signal from the "Door locked " switch is
present although there is no signal from the
"Door closed" switch.
This error code can only be generated prior to
programme start.
If the power is on, be very careful when
working on the the machine.
Try to restart the machine (i.e. reset the error
code) by pressing START.
If the error returns, troubleshoot as follows:
Fig.
1. Undo the card connection X5 on I/O card 1, A11
25
Error message returns
Fig.
26
I/O card A11 probably defective.
438 9152-11/03
04.03
12. Troubleshooting
No error message
Troubleshoot the door lock
and the cabling for electric
or mechanical short-circuit.
25
X5
26
Actuator
12
3973
5368
Cables
6112
29