Electrolux W365H Service Manual page 133

Service
Manual
HEATING RELAY ON IF NOT HEATED
TEMPERATURE INCREASE ALLOWED
LEVEL EMPTY
LEVEL OVERFILL
PAUSE TEST LEVEL
PAUSE TEST TEMPERATURE
DEFAULT TEMPERATURE HYSTERIS
TEMPERATURE STEP IN COOL-DOWN
DEFAULT LOW EXTRACT TIME
DEFAULT MEDIUM EXTRACT TIME
DEFAULT HIGH EXTRACT TIME
DEFAULT DRAIN TIME
DEFAULT DISTR. TIME
DO UNBALANCE MEASUREMENT
DRAIN OPEN DELAY
START EXTRACT TIME
Y/N
HEATING RELAY ON IF NOT HEATED
TEMPERATURE INCREASE ALLOWED
LEVEL EMPTY
LEVEL OVERFILL
PAUSE TEST LEVEL
PAUSE TEST TEMPERATURE
DEFAULT TEMPERATURE HYSTERIS
TEMPERATURE STEP IN COOL-DOWN
DEFAULT LOW EXTRACT TIME
DEFAULT MEDIUM EXTRACT TIME
DEFAULT HIGH EXTRACT TIME
DEFAULT DRAIN TIME
DEFAULT DISTR. TIME
DO UNBALANCE MEASUREMENT
DRAIN OPEN DELAY
START EXTRACT TIME
Y/N
438 9145-41/03
03.11
23. Programme unit
Y
Y
90
200
0
-18 °C
4 °C
4 °C
00:00
00:00
00:00
00:00
00:00
N
0:13
00:30
Answer Yes (Y) or No (N).
Press .
Y
Y
90
200
0
-18 °C
4 °C
4 °C
00:00
00:00
00:00
00:00
00:00
N
0:13
00:30
Answer Yes (Y) or No (N).
Press .
Heating relay on
Here you determine whether the heating relay will
switch on when heating begins.
Note that the heating relay switches on even if the
answer "Yes" is in place for the function "MACHINE
NOT HEATED" (see "SETTINGS 1").
If you answer Yes (Y):
The heating relay will switch on when heating
begins. This is the normal sequence in machines
with heating.
If you answer No (N):
The heating relay will not switch on. Used for
machines without heating (not using heating),
which are equipped with a heating relay.
Temperature increase allowed
Here you determine whether or not it will be
possible for the user, during a wash program, to
adjust the wash temperature to a level higher than
the temperature set (this would be done by
highlighting the line "SET TEMPERATURE" and
entering a different wash temperature).
991 NORMAL 95°C STD
PROGRAM STEP: MAIN WASH
STEP TIME:
SET TEMPERATURE:
ACTUAL TEMPERATURE:
REMAINING TIME:
DRUM SPEED:
RAPID ADVANCE
PAUSE
The following functions determine how
temperatures may be changed:
TEMPERATURE INCREASE ALLOWED
If you answer Yes (Y):
This allows the temperature to be changed to a
value which is either higher or lower than the
original "set temperature" of the wash program.
If you answer No (N):
The only type of change allowed will be to a
value which is lower than the original "set
temperature".
Under "SETTINGS 1" there is the function:
ADJUST TEMPERATURE ALLOWED
which determines whether or not altering the
temperature is allowed at all.
Under "SETTINGS 2" (i.e. later in this section) there
is the function:
MAX ADJUST TEMPERATURE
which determines the upper temperature limit for
manual temperature adjustment.
23
1
720 SEC
85 °C
21 °C
70 MIN
48 RPM
SELECT
47