Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux WA SL1 E 101
Summary of Contents for Electrolux WA SL1 E 101
- Page 1 Washing Machine WA SL1 E 101 WA SL2 E 101...
-
Page 2: Table Of Contents
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Care and cleaning Product description What to do if… Control panel Technical data Personalization Consumption values First use Installation Daily use Electrical connection Helpful hints and tips... - Page 3 3 Installation • Never pull the power supply cable to re- move the plug from the socket; always • This appliance is heavy. Care should be take hold of the plug itself. taken when moving it. • Never use the appliance if the power sup- •...
-
Page 4: Product Description
4 electrolux Product description Your new appliance meets all modern re- The NEW JET system allows total use of de- quirements for effective treatment of laundry tergent and reduces water consumption so with low water, energy and detergent con- saving energy. - Page 5 5 Programme selector dial START/PAUSE button ( START/PAUSE - DEPART/PAUSE ) TEMPERATURE button ( TEMP. ) DELAY START button ( ZEITVORWAHL SPIN reduction button ( U/MIN. - ES- - DEPART DIFFERE ) SORAGE ) Display OPTION button ( OPTION - OPTIONS )
-
Page 6: Personalization
6 electrolux • During a washing cycle, a black line blinks • Delay start under the washing phase symbol of the – The selected delay (20 hours max) set running programme. At the end of each by means of the relevant button appears... -
Page 7: First Use
7 First use • Ensure that the electrical and water any laundry in the machine, to remove connections comply with the installa- any manufacturing residue from the tion instructions. drum and tub. Pour 1/2 a measure of • Remove the polystyrene block and detergent into the main wash com- any material from the drum. - Page 8 8 electrolux Select the required programme by proposes the maximum spin speed pro- vided for that programme. means of programme selector dial (1) You can choose the right programme for any Press this button repeatedly to change the type of laundry following the descriptions on spin speed, if you want your laundry to be the washing programme tables (see «Wash-...
- Page 9 9 has been set. Press the same button to de- If you wish to activate this option permanently activate the option. press simultaneously buttons 2 and 3 for After selecting the options, wait about few some seconds: the relevant symbol appears seconds until the display gets back to the on the display.
- Page 10 10 electrolux and then by 1 hour up to a maximum of 20 starts blinking. Press the button again to re- hours by means of this button. start the programme. The selected delay time value will appear on Cancelling a programme the display for about 3 seconds, then the du- ration of the programme will appear again.
-
Page 11: Helpful Hints And Tips
11 If you do not intend to carry out another open to prevent the formation of mildew and wash, close the water tap. Leave the door unpleasant smells. Stand by : once the programme has finished is reduced. By pressing any button the ap-... -
Page 12: Washing Programmes
12 electrolux The detergent and any additives must be Use less detergent if: placed in the appropriate compartments of • you are washing a small load the dispenser drawer before starting the • the laundry is lightly soiled wash programme. - Page 13 13 Programme Maximum and Minimum Temperature Detergent Com- Cycle Description Options partment Maximum Fabrics Load Type of Laundry SPIN REDUCTION 40- 60 MIX MIXED FABRICS NIGHT CYCLE 40° RINSE HOLD Main wash - Rinses - Long spin PREWASH Max. load 8 kg...
- Page 14 14 electrolux Programme Maximum and Minimum Temperature Detergent Com- Cycle Description Options partment Maximum Fabrics Load Type of Laundry SPIN REDUCTION VISKOSE - VISCOSE VISCOSE NIGHT CYCLE 40° - Cold RINSE HOLD Main wash - Rinses - Short spin PREWASH Max.
- Page 15 15 Programme Maximum and Minimum Temperature Detergent Com- Cycle Description Options partment Maximum Fabrics Load Type of Laundry SPIN REDUCTION DESSOUS - LINGERIE (Handwash) NIGHT CYCLE LINGERIE RINSE HOLD 40° - Cold Main wash - Rinses - Short spin Max.
-
Page 16: Care And Cleaning
16 electrolux Programme Maximum and Minimum Temperature Detergent Com- Cycle Description Options partment Maximum Fabrics Load Type of Laundry SPIN REDUCTION SUPER ECO Cold RINSE HOLD Main wash - Rinses - Short spin EXTRA RINSE Max. load 3 kg Mixed fabrics (cotton and synthetic). Cold wash programme designed for saving energy, water and time. - Page 17 17 External cleaning 1. Remove any rust deposits on the drum with a cleaning agent for stainless steel. Clean the exterior cabinet of the appliance 2. Run a washing cycle without any washing with soap and water only, and then dry thor- to clean off any cleaning agent residues.
- Page 18 18 electrolux 9. Screw the pump fully in. 10. Close the pump door. Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty.
-
Page 19: What To Do If
19 1. pull out the plug from the power socket; 2. close the water tap; 3. if necessary, wait until the water has cooled down; 4. open the pump door; 5. place a bowl on the floor and place the end of the emergency emptying hose into the bowl. - Page 20 20 electrolux Problem Possible cause/Solution The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket.
- Page 21 21 Problem Possible cause/Solution Too much detergent or unsuitable detergent (cre- ates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose;...
-
Page 22: Technical Data
22 electrolux Problem Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distrib- uted in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears Spinning starts late or the machine does not and normal spinning can resume. -
Page 23: Consumption Values
23 Spin Speed Maximum 1600 rpm Consumption values Programme Energy consumption Water consumption Programme duration (KWh) (litres) (Minutes) White Cottons 95° Cottons 60° Cotton Energy Saving For the duration of the programmes, Programme 60° please refer to the Cottons 40°... - Page 24 24 electrolux plug caps supplied in the bag containing the instruction booklet. 4. Slide out the relevant plastic spacers. 7. Connect the water inlet hose as descri- bed under the paragraph «Water inlet». Positioning and levelling Install the machine on a flat hard floor.
- Page 25 25 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. Water inlet An inlet hose is supplied and can be found inside the machine drum. Caution! This appliance must be connected to a cold water supply.
-
Page 26: Electrical Connection
26 electrolux to the tap with a piece of string or attach- ing it to the wall. 2. In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. -
Page 27: Environment Concerns
27 The power supply cable must be Should the appliance power supply easily accessible after installing the cable need to be replaced, this must machine. be carried out by a Service Centre. Environment concerns This means that they can be recycled by dis-... - Page 28 132948860- 00 -062010...