Table 4-7 Blinding Threshold Values - Honeywell EQUIP HD3MDIP User Manual

IP Camera Web-Client
60
Configuring Camera Blinding Detection
An obstacle in front of the camera lens can blind the camera. When this occurs, camera
blinding is detected and an alarm message appears above the video display (see
Figure 4-13). To detect camera blinding:
1. Click the Video Analytics tab.
2. In the Blinding Threshold list, select one of the following options:
Table 4-7 Blinding Threshold Values
Value
High (80%)
Medium (50%)
Low (30%)
3. Click Apply.
Note To turn off camera blind detection, select Disable in the Blinding Threshold
list. Disable is the default value.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Configuring Camera Field of View Change Detection
The Web-Client application can detect tampering of the camera field of view and show an
alarm message above the video display (see
change:
1. Click the Video Analytics tab.
To detect ...
Maximum blinding. The alarm message appears when the
HD3MDIP/X camera is blinded by 80% or more.
Medium blinding. The alarm message appears when the
HD3MDIP/X camera is blinded by 50% or more.
Minimum blinding. The alarm message appears when the
HD3MDIP/X camera is blinded by 30% or more.
Figure 4-13). To detect a camera field of view