Table of Contents
Advertisement
Troubleshooting
Technical Support
Problem: Lens Out of Optical Focus
Document 800-04132V1 Rev A
01/10
Prior to calling Honeywell technical support, refer to the following topics for possible
solutions to problems with your HD3MDIP/X camera. To contact the Honeywell Video
Systems technical support team, call 1-800-796-2288 (North America only) or send an
e-mail to HVSsupport@honeywell.com.
Any equipment returned to Honeywell Video Systems for warranty or service repair must
have a Return Merchandise Authorization (RMA) number. The RMA number must be
clearly marked on all return packages and internal paperwork.
Possible solutions:
1.
Verify that the lens cap has been removed from the camera.
2.
This can also be caused by dirt, oil, grease, and fingerprints, and so on, that have
accumulated on the lens or bubble. Check the lens and bubble, then clean them, if
needed.
Caution
Use extreme caution when cleaning the lens and bubble so you do
not scratch their optical surfaces. Prepare a washed-out cotton cloth
or lens cleaning paper with alcohol or lens cleaning liquid. Clean by
moving spirally from the lens center towards its rim. Repeat until the
lens is completely clean.
B
67
Hide quick links:
Advertisement
Table of Contents
