Table of Contents
Advertisement
Installation and Setup
Mounting the Camera
24
Surface Mount
1.
Secure the skirt to the ceiling or wall using
the appropriate screws (supplied).
2.
Connect the wires (see
Wires
on page 19).
3.
Rotate and align the camera assembly
yellow label with the skirt yellow label.
4.
Secure the camera assembly to the skirt by
pushing it into the skirt, then twisting it
clockwise until it clicks securely in place.
5.
Secure the camera assembly to the skirt by
twisting it clockwise until it clicks securely
in place.
6.
Adjust the camera's field of view (see
Adjusting the Camera FOV (Field of View)
on page 25).
7.
Install the turret by clicking it into place.
8.
Install the bubble by placing it on the camera with the tabs to the left of the slots, then
turning it clockwise until the tabs click securely into place.
Connecting the
Skirt
Screws
(supplied)
Camera
assembly
Turret
Bubble
Hide quick links:
Advertisement
Table of Contents
