Table of Contents
Advertisement
AddPVC: You can add a PVC to the ATM interface. From the Bridging screen,
select an ATM interface Vpi, Vci and Encapsulation type and then click Apply.
Flush: Selecting this command from the Bridging screen, will flush all PVC
entries.
Disable: Selecting this command from the Bridging screen, will disable the
PVCs but retain the parameters, so that they can be enabled at a later point.
5.12.2 Spanning tree
To access the spanning tree menu click the Spanning Tree tab, located at the top of
the Bridging screen.
59
Advertisement
Table of Contents
