Table of Contents
Advertisement
4.4.4 PPPoA
ADD AN ENTRY
To set up PPPoA, click PPPoA, configure the common fields and the following fields.
Click the Add button to add the entry.
User name and Password: used for remote customers to login upon dialup.
PPPoA is manually activated by entering startup commands from the page:
Advanced>Configure PPPoA. The Authentication field defines the
authentication code: PAP or CHAP.
Authentication: defines the authentication code (PAP, CHAP).
MODIFY AN ENTRY
To modify an entry, complete the following steps:
STEP 1: Select the entry from the Current ATM PVC List, at the bottom of the
WAN Setup page. The current values of the selected entry will display in the
upper section of the page.
STEP 2: Change the parameters.
STEP 3: Click Modify.
DELETE AN ENTRY
To delete an entry, Select it from the Current ATM PVC List, at the bottom of the
WAN Setup page, and click the Delete button.
17
Advertisement
Table of Contents
