Chapter 7
To access the Diagnostics screen, click the Diagnostics button, which is located on
the menu bar. The Diagnostics screen has two test functions: OAM Loopback and
Ping test.
7.1
OAM Loopback
STEP 1: lick the Diagnostics button, on the menu bar.
STEP 2: Click the Loopback tab on the Diagnostics screen.
STEP 3: Enter the following information to run the OAM loopback:
Flow type: F5 SEG (Segment to Segment) and F5 ETE (End-to-End). The SEG
loopback is from ATUR to DSLAM. The ETE loopback is from ATUR to the ISP RAS.
VPI and VCI: Specify the virtual channel that will run the OAM loopback.
Loopback ID: Type the loopback pattern for the loopback
STEP 4: Click the Start Loopback button at the bottom of the screen.
Web Diagnostics
68