Pnp/Pci Configuration Setup - QDI ADVANCE 10F User Manual

Motherboard
Table of Contents

Advertisement

PNP/PCI Configuration Setup

Figure-7 PNP/PCI Configuration Setup Menu
The following indicates the options for each item and describes their meaning.
Item
Option
l
PNP OS Installed
Yes
No
l
Reset Configuration
Enabled
Data
Disabled
l
Resources
Manual
Controlled By
Auto
l
PCI/VGA Palette
Enabled
Snoop
Disabled
Assign IRQ For
Enabled
l
VGA
Disabled
l
Assign IRQ For
Enabled
USB
Disabled
l
IRQ-3~IRQ-15
Legacy ISA
assigned to
PCI/ISA PnP
l
DMA-0~DMA-7
Legacy ISA
assigned to
PCI/ISA PnP
Description
Device resources assigned by PnP OS.
Device resources assigned by BIOS.
The system BIOS will reset configuration data
once then automatically set this item as disabled.
Disables the configuration data function.
Assigns the system resources ( IRQ and DMA)
manually .
Assigns system resources (IRQ and DMA) auto-
matically by BIOS.
Enabled PCI/VGA Palette Snoop.
Disabled PCI/VGA Palette Snoop.
Assigns the needed IRQ for the VGA card.
Does not assign an IRQ for the VGA card, in
order to release the IRQ.
Assigns an IRQ for USB. If an USB device is used
enables this item.
Does not assign an IRQ for USB.
The specified IRQ-x will be assigned to ISA only.
The specified IRQ-x will be assigned to ISA or PCI.
The specified DMA-x will be assigned to ISA only.
The specified DMA-x will be assigned to ISA or PCI.
Chapter 3
3 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advance 10b

Table of Contents