Faq - QDI ADVANCE 10F User Manual

RecoveryEasy
2.6 CHANGE PWD
Function : Changes the password to enter RecoveryEasy Partition or Recovery User
Interface.
Limitation : None.
Steps : Follow the system prompt, input the password no more than 6 characters
twice. To delete the password, follow the system prompt and press the
"Enter" key twice.
Note:
a. The password should be no more than 6 characters, only digital and alphabetic letters
are valid.
b. Once the password is enabled, users will be asked to input the password every time
they try to enter the RecoveryEasy user interfaces, and up to 3 times try is permitted.
2.7 Others
Ctrl+Bksp : Switches to Partition User Interface.
ESC : Exits from the Partition User Interface.
F5 : When two or more than two hard disks are installed on the system, use F5
key to choose the hard disk. When processing a certain hard disk, F5 key
can be used to choose the partition.

FAQ:

1. What does RecoveryEasy do?
RecoveryEasy creates a so-called "mirror partition" with same size for the hard disk
partition on the same hard disk, and then completely backups all the data sector by
sector to the mirror area. This mirror partition is reserved to OS. When the OS ruins
either by mistakes or virus, users can recover the partition from its mirror.
2. Does RecoveryEasy occupy the system resources?
Although some hard disk data protection applications can automatically protect the
disk data in runtime, it lowers the system performance. Unlike these applications,
RecoveryEasy need users to backup or restore datamanually when needed, but it
DOES NOT lower the system performance when the system is running. It does not
occupy either hard disk space or system memory, additional floppy disk or ISA/PCI
cards are unnecessary.
3. RecoveryEasy utilizes Build-in BIOS skill, what is build-in BIOS?
RecoveryEasy build-in BIOS means all functions of RecoveryEasy including creating
partition, backuping and restoring partition are built in BIOS. Users just need to down
load the latest BIOS from our Website (http://www.qdigrp.com) when wanting to
upgrade (It's free!).
5 2