QDI ADVANCE 10F User Manual page 36

Award BIOS Description
l Gate A20 Normal
Option
Fast
l Security Option System
Setup
l OS Select For Non-OS2
DRAM>64MB
OS2
HDD S.M.A.R.T Enabled
l
Capability Disabled
l Video BIOS Enabled
Shadow
Disabled
l C8000~CBFFF Enabled
Shadow:
DC000-DFFFF
Shadow: Disabled
l Delay For HDD 0~3
0~3 (Secs):
l Show Bootup Disabled
Logo Enabled
l Flash Write Enabled
Protect
Disabled
3 2
The A20 signal is controlled by the keyboard controller
or chipset hardware.
Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
Select whether the password is required every
time the system boots or only when you enter
setup.
If your operating system is not OS/2, please select
this item.
If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
Enables S.M.A.R.T hard disk support.
Invalidates this feature.
Video BIOS will be copied to RAM. Video Shadow
will increase the video speed.
Video shadow is disabled.
Optional ROM will be copied to RAM by 16K bytes
per unit.
The shadow function is disabled.
Sets the pre-delay time for hard disk to be
accessed by the system.
Enables the logo when system boots up.
Logo will not be shown when system boots up.
Does not allow you to upgrade the BIOS.
Note: Enabling this item can protect the
system BIOS from being attacked by severe
virus such as CIH. Therefore disable this
item item only when wanting to flash BIOS,
afterwards set this item as Enabled (default).
Disabling this item allows you to upgrade the BIOS.