Power Management Setup - QDI ADVANCE 10F User Manual

Power Management Setup

Figure-6 Power Management Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option
l ACPI function Enabled
Disabled
Power User Define
l
Management
Min Saving
Max Saving
l ACPI Suspend S1
Type S3
l PM Control by N O
APM
Yes
l Video Off option All Modes-off Screen blanks when enters all modes.
Suspend-off
Always on
l Video Off Blank Screen The system BIOS will only blank off the screen
Method
V / H SYNC + In addition to Blank Screen, BIOS will also turn
Blank
DPMS
Description
Validates ACPI function.
Invalidates ACPI function.
Users can configure their own Power Management
Timer.
Pre - defined timer values are used. All timers are
in their MAX values.
Pre - defined timer values are used. All timers are in
their MIN values.
Selects the ACPI suspend type.
System BIOS will ignore APM when Power
Management is enabled.
System BIOS will wait for APM's prompt before
entering any PM mode e.g. Standby or Suspend.
Screen blanks after the system enters suspend
mode.
screen is always on.
when disabling video.
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
This function is enabled only for the VGA card
supporting DPMS.
Chapter 3
3 5