Integrated Peripherals - QDI ADVANCE 10F User Manual

Award BIOS Description

Integrated Peripherals

The following indicates the options for each item and describes their meaning.
Item Option
l OnChip IDE Enabled
channel 0/1 Disabled
l IDE Prefetch/Mode Enabled
Disabled
l IDE Mode 0 - 4
Primary/ Secondary
Master/Slave PIO Auto
l IDE Auto
Primary/ Secondary
Master/Slave UDMA Disabled
l Init Display First PCI SLOT
AGP
l IDE HDD Block Enabled
Mode
l Onboard FDC Enabled
Controller Disabled
l Onboard Serial 3F8/IRQ4,
Port 1/2 2F8/IRQ3,
3E8/IRQ4,
2E8/IRQ3,
Auto
Disabled
38
Figure-8 Integrated Peripherals Menu
Enables OnChip IDE First/Second Channel.
Disables OnChip IDE First/Second Channel.
Enables IDE Prefetch Mode.
Disables IDE Prefetch Mode.
Defines the IDE primary/secondary master/ slave
PIO mode.
The IDE PIO mode is defined by auto -detection.
Ultra DMA mode will be enabled if an ultra DMA
device is detected.
Disables this function.
Initializes the PCI VGA first. If a PCI VGA card
and an AGP card are installed together in the
system, the one initialized first functions.
Initializes the AGP first.
Allows IDE HDD to read/write several sectors
at once.
Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
Defines the onboard serial port address and required
interrupt number.
Onboard serial port address and IRQ are auto-
matically assigned
Onboard serial port is disabled.
Description