Setting The Power On Mode - NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

PROGRAM TIMER
This sets the day and time at which the power will be
switched ON/OFF as well as the input mode.
Example: Setting so that the power will be switched
on at 8:30 A.M., Monday, displaying RGB2 source,
and switched off at 10:30 A.M.
Perform Steps 1-2 of TIMER, then...
3. Use the and buttons to select "PROGRAM".
TIMER
PRESENT TIME
PROGRAM
SEL. ADJ.
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
The "PROGRAM TIMER" screen appears.
5. Adjust using the and
button.
PROGRAM TIMER
DATE ON OFF
MON 08 : 30 10 : 30
— - - : - - - - : - -
— - - : - - - - : - -
— - - : - - - - : - -
— - - : - - - - : - -
- - : - - - - : - -
—
— - - : - - - - : - -
SEL.
ZOOM ADJ.
The mode switches as follows each time the ZOOM
/ button is pressed:
• Date
— SUN MON ... SAT
• ON/OFF Hour
00 01 02 .....
• Minute
00 01 02 .....
• INPUT
— LAST VIDEO1
RGB3 RGB2 RGB1
• FUNCTION
— ORBITER INVERSE
6. Once the setting is completed...
Press the EXIT button.
The programs are stored, and return to the TIMER
screen.
Information
PROGRAM TIMER settings
DATE ....................... Set the day of the week (e.g.
Sunday).
ON (hour, minutes) .... Set the time at which the power
will be turned on in the 24-hour
format.
: OFF
EXIT RETURN
buttons and ZOOM
FUNCTION
INPUT
RGB2 INVERSE
— —
—
—
— —
— —
— —
—
—
EXIT
RETURN
* *SUN *MON ... *SAT
21 22 23
57 58 59
VIDEO2 VIDEO3 HD/DVD1
HD/DVD2
WHITE WIPER
OFF (hour, minutes) ... Set the time at which the power
INPUT ..................... Set the input mode that will be
FUNCTION ............. Set the LONG LIFE function.
To reset the program
Align the cursor with the DATE field that you wish to
reset, then press the CLEAR button.
To reset the data
Align the cursor with the field (ON/OFF/INPUT/
FUNCTION) that you wish to reset, then press the
CLEAR button.
Special characters in the PROGRAM TIMER
screen
DATE ON
08 : 30
MON
TUE - - : - -
SAT 08 : 30
08 : 30
*FRI
/
— - - : - -
SAT 08 : 30
15 : 30
*
SEL. ZOOM
• An asterisk "*" in the DATE field
An asterisk "*" means "every". For example, "*FRI"
means every Friday and "*" means everyday.
• A hyphen "-" in the ON field or OFF field
If any hyphen remains in the ON field or OFF field, the
FUNCTION can not be set.
• A hyphen "-" in the FUNCTION field
A hyphen "-" means last mode (the mode that was last
selected at the time the power was switched off).

Setting the power on mode

This function sets the input mode at the time the power is
switched on.
Example: Setting "VIDEO2"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then ...
1. Use the and buttons to select "OPTION3", then
press the MENU/ENTER button.
The "OPTION3" screen appears.
2. Use the and buttons to select "PWR. ON MODE".
3. To set the PWR. ON MODE to "VIDEO2"...
Use the and buttons to select "VIDEO2".
The mode switches to LAST and any one of the sources
shown in the table on page E-3 each time the
button is pressed.
The available sources depend on the settings of "BNC
INPUT" and "D-SUB INPUT".
E-34
3-97
CONFIDENTIAL
will be turned off in the 24-hour
format.
displayed when the timer is on.
PROGRAM TIMER
OFF INPUT FUNCTION
10 : 30 RGB2 INVERSE
—
18 : 15 —
12 : 15 VIDEO1 WHITE
10 : 00 HD/DVD1 —
—
- - : - - —
12 : 15 VIDEO1 WHITE
16 : 00 RGB1 —
ADJ. EXIT RETURN
or