Download  Print this page

Reducing The Brightness Of Closed Caption; Setting The Power On Mode; Signal Information Menu; Checking The Frequencies, Polarities Of Input Signals, And Resolution - NEC PlasmaSync 42XR4 Operation Manual

Nec plasmasync 42xr4: users manual
Hide thumbs

Advertisement

Table of Contents
Information
CLOSED CAPTION settings
OFF: This exits the closed caption mode.
CAPTION1~4: Text is superimposed.
TEXT1~4: Text is displayed in full screen.
A closed caption signal may not be decoded in the
following signature;
1. when a video tape has been dubbed.
2. when the signal reception is weak.
3. when the signal reception is nonstandard.
When using closed captioned channel or the text mode,
the text screen always appears.
When there is no signal, however, the text screen will
not display text characters.

Reducing the brightness of Closed Caption

Use this to reduce the brightness of Closed Caption.
Example: Setting "NORMAL"
Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "CAPTION CONT." of "FUNCTION" menu, select
"NORMAL".
FUNCTION
ADVANCED OSM
POWER MGT.
INPUT SKIP
SUB. PICTURE
ZOOM NAV
PICTURE FREEZE
PDP SAVER
CLOSED CAPTION
CAPTION CONT.
PWR. ON MODE
SEL.
ADJ.
Information
CAPTION CONT. settings
NORMAL: Closed Caption brightness is set to normal.
LOW: Closed Caption brightness is set to lower.

Setting the power on mode

This function sets the input mode and the sound volume
at the time the power is switched on.
Example: Setting the input mode to "VIDEO2"
Set "ADVANCED OSM" to "ON" in the FUNCTION menu.
On "FUNCTION" menu, select "PWR.ON MODE ", then
press the MENU/ENTER button.
The "PWR.ON MODE " screen appears.
On "INPUT " of "PWR.ON MODE " menu, select
"VIDEO2".
The available inputs depend on the setting of input.
PWR. ON MODE
INPUT
VOLUME
SEL.
ADJ.
Information
INPUT settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2: VIDEO input mode.
DVD/HD1~4: DVD/HD input mode.
RGB: RGB input mode.
MULTI: Multi screen mode.
To set MULTI INPUT
• Set the INPUT button to "MULTI ", then press the
MENU/ENTER button.
The "MULTI SCREEN SETTING " will appear on
the screen.
:
OFF
:
OFF
:
OFF
:
BTM LEFT
:
S BY S1
:
MANUAL
:
OFF
:
NORMAL
RETURN
EXIT
:
VIDEO2
:
22
RETURN
EXIT
• Use the
and
", then use the
and
BY SIDE1~3" and "PICTURE IN PICTURE
(BOTTOM LEFT~TOP LEFT)".
• Use the
and
buttons to select "MAIN "/"SUB "
and "LEFT "/"RIGHT ", then use the
to choose from "VIDEO1~2 ", "DVD/HD1~4 " and
"RGB ".
PICTURE IN PICTURE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
:
BOTTOM RIGHT
INPUT MODE
MAIN
:
VIDEO1
SUB
:
DVD/HD1
SEL.
ADJ.
EXIT
RETURN
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
0 to 44: The level of sound volume.

Signal Information Menu

Checking the frequencies, polarities of input
signals, and resolution
Use this function to check the frequencies and polarities
of the signals currently being input from a computer, etc.
On "MAIN MENU", select "SIGNAL INFO.", then press
the MENU/ENTER button.
The "SIGNAL INFORMATION" is displayed.
SIGNAL INFORMATION
H. FREQUENCY
V. FREQUENCY
H. POLARITY
V. POLARITY
MEMORY
RESOLUTION
PC:
Others: MODE will be displayed.
En-30
buttons to select "MULTI MODE
buttons to choose from "SIDE
and
SIDE BY SIDE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
:
SIDE BY SIDE1
INPUT MODE
LEFT
:
VIDEO1
RIGHT
:
DVD/HD1
SEL.
ADJ.
EXIT
RETURN
:
48.4KHz
:
60.0Hz
:
NEGATIVE
:
NEGATIVE
:
24
:
1024
768
EXIT
RETURN
MEMORY will be displayed.
buttons

Advertisement

Table of Contents
loading

  Related Manuals for NEC PlasmaSync 42XR4