Download  Print this page

Setting A Computer Image To The Correct Rgb Select Screen; Setting High Definition Images To The Suitable Screen Size - NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

Hide thumbs

Advertisement

Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the "RGB SELECT" mode to
"MOTION "
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "OPTION1", then
press the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the
and
buttons to select "RGB SELECT".
3. To set the RGB select mode to "MOTION" ...
Use the
and
buttons to select "MOTION".
The mode switches as follows each time the
button is pressed:
AUTO
STILL
MOTION
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO .............. Select the suitable mode for the
specifications of input signals as
listed in the table "Computer input
signals supported by this system" on
page E-43.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1 ............. When an 852 dot
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
or
WIDE1
WIDE2
DTV
1 / 3
:
RGB
:
RGB
:
MOTION
:
1080B
:
OFF
:
OFF
EXIT
RETURN
480 line signal
480 line signal
E-26
3-89
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page E-43 for the details of the above settings.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "1080B" mode to "1035I"
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the
and
buttons to select "OPTION1", then
press the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the
and
buttons to select "HD SELECT".
3. To set the HD SELECT mode to "1035I" ...
Use the
and
buttons to select "1035I".
The mode switches as follows each time the
button is pressed:
1080B
1035I
1080A
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B ............... Standard digital broadcasts
1035I ............... Japanese "High Vision" signal format
1080A ............... Special Digital broadcasts (for
example : DTC100)
CONFIDENTIAL
or
1 / 3
:
RGB
:
RGB
:
AUTO
:
1035
I
:
OFF
:
OFF
EXIT
RETURN

Advertisement

Table of Contents
loading

  Related Manuals for NEC PlasmaSync 42VP4 (42Wide VGA)

  Related Content for NEC PlasmaSync 42VP4 (42Wide VGA)