Setting The Power On Mode; Enabling/Disabling The Front Panel Controls - NEC PX-61XM3A Operation Manual

• Use the L and M buttons to select "MULTI MODE",
then use the and
"SINGLE", "SIDE BY SIDE1~3" and "PICTURE
IN PICTURE (BOTTOM LEFT~TOP LEFT)".
• Use the L and M buttons to select "MAIN"/ "SUB"
and "LEFT"/"RIGHT", then use the
to choose from "VIDEO1~3", "HD/DVD1~2" and
"RGB1~3".
PROGRAM TIMER
DATE ON OFF
MON 08 : 30 10 : 30
TUE - - : - - 18 : 15
SAT 08 : 30 12 : 15
08 : 30 10 : 00
*FRI
- - : - - - - : - -
—
SAT 08 : 30 12 : 15
* 15 : 30 16 : 00
SEL. ZOOM ADJ.
PICTURE IN PICTURE
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN : RGB/PC1
SUB : VIDEO1
SEL. ADJ. EXIT RETURN
MULTI REPEAT
Two repeat timers are available.
Each timer has MULTI MODE, WORK TIME and INPUT
MODE functions.
Example:
TIMER1 is set to display RGB1 (MAIN) and VIDEO1
(SUB) for 4 hours in picute-in-picture mode.
TIMER2 is set to display RGB3 (LEFT) and HD/DVD1
(RIGHT) for 2.5 hours in side-by-side mode.
On "MULTI REPEAT" of "TIMER", select "ON", then
press the MENU/ENTER button.
The "MULTI REPEAT TIMER" screen appears.
Adjust the items.
TIMER
PRESENT TIME
PROGRAM : OFF
MULTI REPEAT : OFF
SEL. ADJ. EXIT
RETURN
Information
MULTI REPEAT settings
MULTI MODE: Set the input mode to be displayed
while the timer is on.
WORK TIME: Set the time duration of the display.
Time range is from 1 minutes to 4 hours and 15 minutes.
INPUT MODE: Set the signal that will be displayed
within the selected screen.
Select "MAIN" or "SUB" for "PICTURE IN PICTURE
(BTM LFT~TOP LFT)" and "LEFT" or "RIGHT" for
"S BY S1~3". Only one signal is selected for
"SINGLE".
* The two repeat timers run consecutively, i.e., Timer1–
Timer2–Timer1–Timer2.
* When both PROGRAM TIMER and MULTI REPEAT
TIMER are set, priority is given to PROGRAM TIMER.
buttons to choose from
and buttons
INPUT FUNCTION
MULTI INVERSE
— —
VIDEO1 WHITE
HD/DVD1 —
— —
WHITE
VIDEO1
—
RGB1
EXIT RETURN
SIDE BY SIDE
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
LEFT : RGB/PC1
RIGHT : VIDEO1
SEL. ADJ. EXIT RETURN
MULTI REPEAT TIMER
1 MULTI MODE : BTM LFT
WORK TIME : 04H00M
INPUT MODE
MAIN : RGB/PC1
SUB : VIDEO1
2 MULTI MODE : S BY S1
WORK TIME : 02H30M
INPUT MODE
LEFT : RGB/PC3
RIGHT : HD/DVD1
SEL. ADJ. EXIT RETURN

Setting the power on mode

This function sets the input mode at the time the power is
switched on.
Example: Setting "VIDEO2"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
On "PWR. ON MODE" of "OPTION3" menu, select
"VIDEO2".
The available inputs depend on the setting of input.
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
NEXT PAGE
SEL.
Information
PWR. ON MODE settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
HD/DVD1, 2: HD/DVD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See
page 29.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.
Example: Setting "ON"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
On "CONTROL LOCK" of "OPTION3" menu, select
"ON", then press the MENU/ENTER button.
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
NEXT PAGE
SEL.
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
30
OPTION3 3 / 4
: VIDEO2
: OFF
: ON
: OFF
: ALL
ADJ. EXIT RETURN
OPTION3 3 / 4
: LAST
: ON
: ON
: OFF
: ALL
ADJ. EXIT RETURN