Normal Mode Details - Shimano FlightDeck SC-7900 Service Instructions Manual

• When using in combination with the bracket set (SM-EW79F-E/I), the low
battery indicator will not be displayed even when the battery level for the
gear shifting system is low.
• It is also not displayed during PC-LINK mode or while the pairing confirmation
screen is being displayed.
If the low battery indicator is being displayed for a unit, replace the battery for
that unit as soon as possible.
Main unit display
sc Main unit
spd Speed sensor
hrm Heart rate sensor unit
st-R ST wireless unit /right (optional)
st-L ST wireless unit /left (optional)
* The respective units must be paired for this to happen.
<Low memory indicator>
When the amount of spare memory for recording traveling data in the main
unit drops to 10% or less, the low memory confirmation screen is display by the
main unit as a notification. This display can be cleared by pressing the set
button, select button, button A or button B on the main unit.
If the low memory indicator appears, delete any unneeded traveling data to
make more free memory available.
(For details on how to delete data, refer to page 39.)
• If the low battery indicator and the low memory indicator are generated at
the same time, each screen will be displayed alternately for one second.
• If you clear the low battery indicator or low memory indicator while riding
the bicycle, the low battery or low memory confirmation screen will be
displayed once more when speed signals are no longer being input.
24
Press a button on
the main unit
(Low battery
confirmation screen)
Unit
Low battery icon
Press a button on
the main unit
(Low memory
confirmation screen)

Normal mode details

■
Display Mode 1
Clock Traveling distance Cumulative distance
(CLK) (DST) (ODO)
■
Display Mode 2
Cadence Speed Maximum speed
(CAD) (VEL) (MAX)
■
Heart rate mode
Calories Average heart rate Maximum heart
(CAL) (AVE) rate (MAX)
■
Altitude/slope mode
Altitude Slope Cumulative increased
(ALT) (SLP) altitude (CALT)
■
Battery/memory mode
Battery charge Memory
display remaining
For details on measurement of the traveling
time, refer to page 42.
Split display Lap display
(SPLT) (LAP)
Average speed Calories
(AVE) (CAL)
Zone transition
time (ZONE)
Select button
Button A
Mode button
Press the select button
Hold down the mode button
(for 2 seconds or more)
Press button A or the mode button
25