Shimano FlightDeck SC-7900 Service Instructions Manual page 23

■ Lap recording operations
If you press the lap button while the stopwatch is running, the main unit
will store the lap data (interval data) in its memory and the lap time will
be displayed.
In addition, if more than one set of lap data is stored in the main unit
memory after the stopwatch has started running, the split times
(cumulative lap times) will also be displayed.
Press the lap
Start button
Lap time 1
Split time 1
Press the lap button while the main unit is
running the stopwatch.
The lap display will appear in the information
display for 2 seconds.
Next, the split display will appear for 2 seconds.
Stopwatch
Press the lap
button
■ Measurement of traveling time
The traveling time is recorded as split times. In order to measure the
traveling time more accurately, set Stopwatch mode to "AUTO".
* For details on the setting method, refer to page 32.
42
Press the lap Press the lap
button
Lap time 2 Lap time 3
Split time 2
Lap button
Lap display (2 sec.) Split display (2 sec.)
11. FLIGHT DECK Manager
Communication can be carried out between the main unit and a personal
computer which has the special FLIGHT DECK Manager application
installed by connecting an optional USB dongle to the personal computer.
This communication function can be used to carry out the following
operations.
■ FLIGHT DECK Manager functions
button
Setting functions
Data transfer functions
Data display functions
Software updating
function
Traveling Data
View window
Bike setting, user setting and system setting operations are
possible.
Traveling data which is stored in the main unit can be sent to
the personal computer.
The traveling data which is sent to the personal computer can
be displayed as graphs.
The software for the main unit can be updated.
43