Setting The Assist Bicycle Function; Setting The Gear Position When Starting From A Stop [Start Mode]; Dynamically Changing The Riding Comfort [Assist Customize] - Shimano Steps SC-E6100 User Manual

„ Setting the assist bicycle function

Setting the gear position when starting from a stop [Start mode]

Automatically shifts to the set gear position when the bicycle starts from a stop.
Setting items
[OFF]
[1], [2],...*1
*1
A gear position up to the maximum gear position of the shifting unit installed to the assist bicycle can be set.
1.
Setting menu screen ⇒ [Start mode] ⇒ <↑> or <↓> to select the gear position ⇒ <F>
The display will automatically return to the setting menu.

Dynamically changing the riding comfort [Assist customize]

The riding comfort of the assist bicycle differs greatly according to the maximum torque of the drive unit and how much
assistance is provided for pedaling. This product has multiple recommended settings registered that can be switched
according to your preference. Details of the settings can be checked with E-TUBE PROJECT and the settings can be
customized. Refer to the user's manual for E-TUBE PROJECT for details.
Setting items
[Profile 1]
[Profile 2]
1.
Setting menu screen ⇒ [Assist customize] ⇒ [Profile 1] / [Profile 2]
Depending on the setting, battery consumption may increase and the assisted traveling range may greatly decrease.
• The settings may differ according to the assist bicycle. Refer to the manual for the assist bicycle.
Do not set the start mode.
Select the gear position.
Changes to the riding comfort registered in [Profile 1].
Changes to the riding comfort registered in [Profile 2].
NOTICE
21
Explanation
Explanation