Shimano FlightDeck SC-7900 Service Instructions Manual page 18

(4) Press the select button, button A or button B to select the desired
sampling period.
• Sampling period: 5 secs., 15 secs., 60 secs.
* The shorter the sampling period, the more detailed is the data that
can be recorded, however the length of recording time available will
also become shorter.
(5) Press the set button to confirm the selected setting.
(6) If you press the select button or button A, the display will change to
the next item. If you press button B, the screen will return to the
previous setting item.
Selecting the stopwatch mode
Starting and stopping the stopwatch counter can
be done using the set button on the main unit, or
automatically by receiving a speed signal.
(1) Press the set button to enable the stopwatch
mode setting (AUTO/MANUAL) to be changed.
The AUTO/MANU setting for "mode" will be
highlighted.
(2) Press the select button, button A or button B to select the desired
mode.
• AUTO (Automatic setting)
When the main unit receives a speed signal, the stopwatch counter
starts, and it stops approximately 4 seconds after the speed signal
stops being received.
• MANU (Manual setting)
The stopwatch counter starts and stops manually when the set button
on the main unit is pressed.
(3) Press the set button to confirm the selected setting.
(4) If you press the select button or button A, "exit" will be selected. If you
press button B, the screen will return to the previous setting item.
■ User settings
(1) Select "USER" from the Setting menu.
(2) Press the set button.
(3) The name entry screen will be displayed.
32
Entering your name
(1) Press the set button to enable the name to be
entered.
You will then be able to enter the first
character.
(2) Press the select button, button A or button B to
select the desired letter.
• Maximum number of characters: 10
• Available characters: Alphabetic characters (uppercase/lowercase),
numerals
(3) Press the set button to confirm the character which you have entered.
The entry point will then move to the right of the character you have
just entered.
(4) Repeat steps (2) and (3) to enter the whole of your name.
(5) After the final character has been entered, press the set button to
confirm the name you have entered.
(6) If you press the select button or button A, the display will change to
the next item.
* If you make a mistake while entering your name, finish off entering
the name and then enter it again starting from step (1).
Changing the gender
(1) Press the set button to enable the gender to be
changed.
The gender display will be highlighted.
(2) Press the select button, button A or button B to
select the gender.
• MALE • FEMALE
(3) Press the set button to confirm the selected gender.
(4) If you press the select button or button A, the display will change to
the next item. If you press button B, the screen will return to the
previous setting item.
Entering your birthday
(DATE type: 1) (DATE type: 2)
33