Restarting In Initialization Mode - Shimano FlightDeck SC-7900 Service Instructions Manual

■ ST wireless units
If there have been no button operations or gear shifting operations for
30 minutes or more, the ST wireless units will switch to sleep mode.

Restarting in initialization mode

If the language or the units have been changed, the main unit will start up
in initialization mode.
* The main unit will also start up in initialization mode when the power is
turned on for the first time.
■ Restarting in initialization mode
(1) To reset the main unit, replace the battery of the main unit or press the
AC switch.
(2) Turn on the power supply for the main unit.
However, if the battery is replaced while the main unit has been in
sleep mode for less than 30 seconds, the main unit will not start up in
initialization mode.
(3) The startup screen for initialization mode will
be displayed (for 3 seconds).
(4) Press the select button, button A and button B
to select the display language.
(5) Press the set button to confirm the display
language selection.
(6) Press the select button, button A and button B
to select the units.
(7) Press the set button to confirm the units
selection.
20
(8) The startup screen will be displayed (for 3
seconds).
(9) The bike No. selection screen will be displayed
(for 3 seconds).
(10) If you press the select button while this screen
is displayed, the bike number will flash and
the bike number can then be changed. If you
press the select button once more, the bike
number can then be changed.
• Bike No.: 1-4
(11) Press the set button to confirm the bike
number selected.
(12) The remaining memory/remaining time
display will appear (for 3 seconds).
• User memory: 0% - 100%
(no remaining memory when 0%)
• Record time: Length of time that traveling
data can be recorded
CAUTION:
Check that there is enough memory
remaining before riding the bicycle.
(13) The normal mode screen will be displayed.
21