Shimano FlightDeck SC-7900 Service Instructions Manual page 27

14. Main Specifications/Display Ranges
Heart rate
30 - 240 bpm (beats per minute)
Traveling distance 0.00 - 9999.99 (km, miles)
Cumulative distance
0.0 - 99999.9 (km, miles)
Longest traveling time 99 : 59 : 59
Average speed
0.0 - 130.0 km/h
Cadence 0 - 299 rpm
Altitude
-550 - 9000 m
Tire circumference
1300 - 2400 mm
Calorie consumption
0 - 99,999 kcal
Approximately one year (300 days when used for 1 hour per
day and PC-LINK used once a week)
Battery/life
* This may be shorter depending on the operating
Specified operating
0°C - 50°C
temperature range
Handlebar installation
31.8 mm / 25.8 mm (Using an adapter)
diameter
Largest chainring : 56, 55, 54, 53, 52, 50
Applicable chainring
Intermediate chainring : 42, 39, 34
tooth configurations
Smallest chainring : 30
11-21T : 11-12-13-14-15-16-17-18-19-21T
11-23T : 11-12-13-14-15-16-17-19-21-23T
11-25T : 11-12-13-14-15-17-19-21-23-25T
Main applicable sprockets
11-27T : 11-12-13-14-15-17-19-21-24-27T
tooth number
11-28T : 11-12-13-14-15-17-19-21-24-28T
configuration
12-23T : 12-13-14-15-16-17-18-19-21-23T
12-25T : 12-13-14-15-16-17-19-21-23-25T
12-27T : 12-13-14-15-16-17-19-21-24-27T
50
0.0 - 80.8 mph
environment, the PC-LINK frequency and other conditions.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following.
measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and
receiver.
--- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/TV technician
for help.
51