When The Lamp/Temp Indicator Is Lit/Flashing Orange - Epson EMP-835 User Manual

Problem Solving

When the Lamp/Temp Indicator is Lit/Flashing Orange

Status
High-speed cooling in progress
Red
Orange
Lamp replacement notification
Orange
TIP
• If the projector is not operating properly even though the indicators are all showing normal, refer to "When the Indicators Provide No Help".
s
p.99
• If an indicator is showing a status which does not appear in the previous tables, contact you dealer or the nearest address provided in the
"International Warranty Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.
Cause
(This is not an abnormality. However, if the temperature rises too high again, projection will stop
automatically.)
•Check that the air filters and air exhaust vent are clear and that they are not up against a surface
such as a wall.
•If the air filters are blocked, clean them.
Replace the lamp with a new one.
If you continue to use the lamp after it has passed the replacement period, the possibility that the
lamp may break will increase. Replace the lamp with a new one as soon as possible.
* The indicator status will vary depending on the projector status at the time.
Warning
Remedy or Status
sp.15
sp.119
sp.121
User's Guide
98
: lit : flashing : off