Registering An Id Number For A Remote Control - Epson EMP-835 User Manual

Functions for Enhancing Projection
Use the [ ] button on the remote control or the [
2
or [ ] button on the projector's control panel to
select the desired ID number (1–9).
Press the [Enter] button on either the remote control or the
projector's control panel to accept the ID number setting.
Once the setting has been made, press the [Menu]
3
button to close the configuration menu.
When registration is complete, only signals from remote
controls with the same ID number or an ID number of "0" can
be received.
]

Registering an ID Number for a Remote Control

PROCEDURE
Press the [ID] button.
1
The [ID] button will light.
Remote control
Press a button from [0] to [9] to specify an ID number.
2
The light for the [ID] button will turn off and the registration
will be complete. If a number other than "0" is registered, the
remote control will only be able to operate projectors that have
the same ID number.
Remote control
User's Guide
65