Epson EMP-835 User Manual page 111

Problem Solving
Check
Is the wireless LAN setting for the computer
set to ad hoc mode?
When connected to a wireless
LAN in easy connection mode
Is the DHCP function of the wired LAN set to
"ON"?
When connected to a wireless
LAN in easy connection mode
Has the network adapter been selected
correctly in EMP NS Connection?
If making a wireless LAN connection, are
there any settings within the power saving
features of your computer which disable the
wireless LAN?
Is the computer's radio wave setting for the
wireless LAN set to low-intensity?
Is the LAN card you are using 802.11g or
802.11b compliant?
Is WEP encryption set to "ON" at the
computer?
Change the wireless LAN settings at the computer to ad hoc mode.
s"Computer Wireless LAN Settings" in the EasyMP Network Setup Guide
Depending on the manufacturer of the wireless LAN card, you may be able to use a communication
setting utility (such as Client Manager) to set ad hoc mode.
"Ad hoc mode" is also referred to "Computer communication using wireless LAN (WiFi), "Wi-Fi ad
hoc", "802.11 ad hoc", "802.11 Mode Connection", "peer to peer" or "computer to computer
network".
Set the DHCP setting of the wired LAN to "OFF" in the EasyMP configuration setting screen.
s"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide
If the computer that you are using has several LAN environments, the correct network adapter to be
used by EMP NS Connection must be selected, otherwise it will not be possible to connect. Start
EMP NS Connection and select the network adapter from the "Extension" - "Switch LAN"
(Windows) or "Extension" - "Network Set" (Macintosh) menu.
Please enable the wireless LAN.
Change the radio wave setting to the highest possible intensity.
Only 802.11g or 802.11b compliant equipment can be used. You cannot use equipment conforming
to any other standards (such as 802.11 or 802.11a).
If using easy connection mode (ad hoc mode), WEP must be set to "OFF", otherwise connection
will not be possible. Set WEP encryption to "OFF". s"Connecting Using Easy Connect Mode
(Wireless LAN)" in the EasyMP Network Setup Guide
Remedy
User's Guide
110