When The Indicator Is Lit Or Flashing Green Or Orange; When The Indicators Provide No Help - Epson dreamio EMP-TW500 User Manual
Epson home projector users guide emp-tw500
Hide thumbs
Also See for dreamio EMP-TW500:
- Specifications (2 pages) ,
- Setup manual (2 pages) ,
- Operation manual (36 pages)
Table of Contents
Advertisement
When the
indicator is lit or flashing green or orange
Standby mode
Orange
If you press
after warm-up is complete.
Warm-up in progress
Green
Warm-up time is approximately 45
seconds.
Power off operations are ignored
while warm-up is in progress.
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a solution, refer to the pages
given for each problem.
Projection does not start, the projection area is
completely black, the projection area is completely blue,
etc.
Problems such as interference, distortion or black &
white checked patterns appear.
Only part of the image is displayed.
Problems when projection starts
Power does not turn on
Problems with network connections
Projector cannot be recognized
Green
, projection will start
Orange
p.34
p.35
p.35
p.36
p.36
p.38
p.39
: Lit
Projection in progress
Normal operation is in progress.
*If the "Button Illumination" configuration
menu command is set to "OFF", they will not
p.21
light.
Cool-down
in progress
Cool-down time is approximately 30 seconds.
After cool-down is complete, the projector goes
to standby mode.
You cannot use the remote control or the
projector's control panel during cool-down.
Image colours are not right
The whole image appears purplish or
greenish, images are black & white, colours
appear dull, etc.
(Computer monitors and LCD screens have
p.34
different colour reproduction performance,
so that the colours projected by the projector
and the colours appearing on the monitor
may not necessarily match, but this is not a
sign of a problem.)
Images appear dark
Problem Solving
Normal
: Flashing
: Off
p.37
p.37
p.37
p.38
33
Advertisement
Chapters
Table of Contents
