I O Indicator Is Lit Or Flashing Orange - Epson EMP-X56 User Manual

Multimedia projector
Table of Contents

Advertisement

Problem Solving

i o Indicator is lit or flashing orange

f
Status
Cause
High Temp Warning
Red
Orange
Replace Lamp
Orange
• If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No
q
Help" (
p.41).
s
• If an indicator is displaying a status not described in the tables, contact your local dealer or the nearest address provided in the
International Warranty Terms.
Warning
(This is not a problem. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it. s p.50,
Replace it with a new lamp. s
p.53
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode
increases. Replace it with a new lamp as soon as possible.
Inquiries
s
: Lit
: Flashing
: Off
: Varies according to the projector status
Remedy or Status
56
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emp-822Emp-x5Emp-s5Emp-83

Table of Contents