Omron SYSDRIVE 3G3MV SERIES User Manual page 80

Preparing for Operation and Monitoring
D Status Monitor
Item Display
U-01 Frequency reference Hz (see
U-02 Output frequency
U-03 Output current
U-04 Output voltage
U-05 DC bus voltage
U-06 Input terminal status p
U-07 Output terminal p
status
U-08 Torque monitor
U-09 Error log (most g (
recent one) )
U-10 Software No.
U-11 Output power
U-13 Accumulated
operating time
3-6
Display
unit
Monitors the frequency reference. (Same as FREF)
note 1)
Hz (see Monitors the output frequency. (Same as FOUT)
note 1)
A Monitors the output current. (Same as IOUT)
V Monitors the internal output voltage reference value of the
Inverter.
V Monitors the DC voltage of the internal main circuit of the
Inverter.
---
Shows the ON/OFF status of inputs.
Not
used
---
Shows the ON/OFF status of outputs.
Not
used
% Displays the torque being currently output as a percentage of
the rated motor torque. This display can only be made in
vector control mode.
--- The four most recent errors can be checked.
Error
generation
item
Note "1" means that the latest error is displayed. Press the
Increment Key to display the second latest error. A maxi-
mum of four errors can be displayed.
--- OMRON use only.
W Monitors the output power of the Inverter. (See note 2.)
x10H Monitor the accumulated operating time in 10-second units.
(See note 3.)
Chapter 3
Function
: ON : OFF
Terminal S1: Multi-function input 1
Terminal S2: Multi-function input 2
Terminal S3: Multi-function input 3
Terminal S4: Multi-function input 4
Terminal S5: Multi-function input 5
Terminal S6: Multi-function input 6
Terminal S7: Multi-function input 7
: ON : OFF
Terminal MA: Multi-function contact output
Terminal P1: Multi-function photo-coupler
output 1
Terminal P2: Multi-function photo-coupler
output 2
Error