Omron SYSDRIVE 3G3MV SERIES User Manual page 304

List of Parameters
H Function Group 1 (n001 through n049)
Param- Regis- Name
eter ter No.
No. (Hex)
n001 0101 Parameter
write-prohibit
selection/pa-
rameter ini-
tialization
10-2
Description
Used to prohibit parameters to be
written, sets parameters, or change
the monitor range of parameters.
Used to initialize parameters to
default settings.
0: Parameter n001 is set or dis-
played. Parameters from n002 to
n179 can be displayed only.
1: Parameters from n001 to n049
(function group 1) are set or dis-
played.
2: Parameters from n001 to n079
(function groups 1 and 2) are set or
displayed.
3: Parameters from n001 to n119
(function groups 1 through 3) are
set or displayed.
4: Parameters from n001 to n179
(function groups 1 through 4) are
set or displayed.
6: Clears the error log.
8: Initializes parameters to default
settings in 2-wire sequence.
9: Initializes parameters to default
settings in 3-wire sequence.
10: For the USA, initializes parameter
in 2-wire sequence.
11: For the USA, initializes parameter
in 3-wire sequence.
Chapter 10
Set- Unit Default Changes
ting of setting
range set-
ting
0 to 9 1 1 No
Ref-
during er-
opera- ence
tion page
3-12
5-2