Omron SYSDRIVE 3G3MV SERIES User Manual page 239

Communications
• Send Data: S
DM
D1000
D1001
D1002
D1003
D1004
D1005
D1006
D1007
D1008
D1009
D1010
• Recv data: D
DM
D2000
D2001
D2002
D2003
Note 1. Set the number of send data items in Hex to the number of words of D10001 through D1010
(11).
Note 2. The number of words of D2001 through D2003 (4) is written in Hex for the number of Recv
data items.
D Status Flags
Network Communications Command Execution Enabled Flag
Communications port 7 enabled setting: A20207
Protocol Macro Execution Flag
The following table describes the Protocol Macro Execution Flag.
Model
CS-series Board
CS-series Unit
Forced Abort Issued Flag
The following table describes the Forced Abort Issued Flag.
Model
CS-series Board
CS-series Unit
000B (Number of send data items: 11) (See note 1.)
0003 (Number of Slaves)
0001 (Slave 1 address)
RUN command to Slave 1
Frequency reference to Slave 1
0002 (Slave 2 address)
RUN command to Slave 2
Frequency reference to Slave 2
0003 (Slave 3 address)
RUN command to Slave 3
Frequency reference to Slave 3
0004 (Number of Recv data items: 4) (See note 2.)
Slave 1 Inverter status
Slave 2 Inverter status
Slave 3 Inverter status
Port 1
190915 191915
((n+9) words)15 ((n+10) words)15
Port 1
190913 191913
((n+9) words)13 ((n+10) words)13
Area
Area
Port 2
n = 1500 + 25 x unit number (words)
Port 2
n = 1500 + 25 x unit number (words)
Chapter 7
7-49