Digital Operators - Omron SYSDRIVE 3G3MV SERIES User Manual

Specifications
H External Dimensions (mm)
3G3IV-PEZZ08122A
Four, M4 tap
3G3IV-PEZZ08122C

9-2-9 Digital Operators

H 3G3IV-PJVOP140 (with FREQUENCY adjuster)
3G3IV-PJVOP146 (without FREQUENCY adjuster)
• The 3G3IV-PJVOP140 and 3G3IV-PJVOP146 are dedicated 3G3JV- and 3G3MV-series Digital Op-
erators. They can be used for remote control or when the Inverter panel needs to be located on the
front of the control panel.
• The 3G3IV-PJVOP140 and 3G3IV-PJVOP146 Digital Operators can store parameter settings, copy
stored settings to another Inverter, and compare stored settings to Inverter settings.
• Be sure to mount the 3G3IV-PJVOP140 in a 3G3IV-PEZZ08386A casing prior to use because the Dig-
ital Operator itself cannot be mounted on or connected by cable to a control panel.
Note The enclosure rating of the 3G3IV-PJVOP146 and that of the 3G3IV-PJVOP140 mounted in a
3G3IV-PEZZ08386A casing both conform to IP20. If the packing provided with the 3G3IV-
Side View
(Common to all the Units)
3G3IV-PEZZ08122D
Four, M4 tap
3G3IV-PEZZ08122B
Four, M4 tap
Chapter 9
Four, M4 tap
9-17