Omron SYSDRIVE 3G3MV SERIES User Manual page 49

Design
Note 4. When multi-function analog outputs are used for pulse train outputs, they can be directly con-
nected to the pulse train inputs at other 3G3MV-series Inverters for simple synchronization or
other applications.
H Selecting Input Method
• Switches SW1 and SW2, both of which are located above the control circuit terminals, are used for
input method selection.
Remove the front cover and optional cover to use these switches.
D Selecting Sequence Input Method
• By using SW1, NPN or PNP input can be selected as shown below.
24 V DC
(±10%)
(Default setting)
S1 to 7
S1 to 7
Selector
Control circuit
terminal block
SW1
SW1
Chapter 2
2-17