Turn Watch On/Off (Cmd 61) - Bosch D621 User Manual

D621 User's Guide

Turn Watch On/Off (Cmd 61)

Use the Watch feature to "watch" points when the system is off. For example,
parents with small children may want a tone to sound whenever a door or window
is opened as a way of monitoring the location of the children.
Use this command to turn the watch feature on and off.
Once you have programmed the system with points to watch (see Select Watch
Points) and the responses (see Select Watch Tone), you need to turn the watch
function on and off.
1. Make sure your system is off (All and Part are off).
2. Press [CMD] [6] [1]. The Command Center may prompt you to
enter a valid passcode by flashing the Cmd indicator.
3. Enter your passcode, if necessary. The Command Center beeps for 1
sec. to indicate that Watch is now on or off, depending on the applied
setting.
• If Watch Tone is ON, the LED indicator for Point 2 flashes.
Press [2] to turn off.
• If Watch Tone is OFF, the LED indicator for Point 1 flashes.
Press [1] to turn on).
46840D
I can perform this command.
I cannot perform this command.
D621 User's Guide
Page 36 © 2003 Bosch Security Systems