Special Settings; Silent Fax Reception; Receiving Faxes Manually - Xerox IF6020 User Manual

office-fax-if-6020-6025-manual-uk-253200935-a.book Seite 50 Mittwoch, 22. April 2009 5:58 17
Setting the Ring Duration
Function is not supported in all countries and networks
(Function is not supported in all countries and networks)
For the receiving mode
device detects that it is a telephone call (no fax).
Press MENU.
1.
Select using [
2.
Confirm with o.
3.
Select using [
4.
Confirm with o.
5.
Using [ select
6.
Confirm with o.
7.
Select the desired ring duration in seconds using [.
8.
Confirm with o.
9.
10. You can exit with j.

Special Settings

Silent Fax Reception

For the reception mode
before it picks up. This makes it possible for you to receive faxes silently without getting dis-
turbed.
Press MENU.
1.
Confirm with o.
2.
Select using [
3.
Confirm with o.
4.
Use [ to select from the following settings:
5.
NO
—Faxes are received with prior ringing.
YES
—Faxes are received without prior ringing.
Confirm with o.
6.
You can exit with j.
7.

Receiving Faxes Manually

Select manual reception under reception mode of the fax switch (
not receive faxes on its own. You can start fax reception manually, by pressing o after lifting
the handset. This setting is useful, when you want to receive faxes via a modem connected
to a computer.
50 ¦ Settings · Setting the Fax Switch
PHONE/FAX
you can set how long the device should ring before the
RECEPT. SET-UP
appears on the display.
INSTALLATION
.
STATION NAME
appears on the display.
TEL.LINE SETUP
.
LINE TYPE
appears on the display.
FAX/TEL TIMER
.
PHONE/FAX TAD/FAX
or
RECEPT. SET-UP
appears on the display.
RECEPTION MODE
appears on the display.
SILENT RX
.
you can set whether the device is to ring
MANUAL
). The device will