Using Additional Telephones (Easylink) - Xerox IF6020 User Manual

office-fax-if-6020-6025-manual-uk-253200935-a.book Seite 58 Mittwoch, 22. April 2009 5:58 17
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must be first in the series if multiple devices
are connected to the same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Notice
Connection to the First Telephone Socket
If you have multiple telephone sockets for the same telephone line, the device must
be connected to the first telephone socket.

Using Additional Telephones (Easylink)

Easylink
With the Easylink function you can control your device with additional telephones. To use this
function, additional telephones must be set to the tone dialling mode (DTMF/MFV tones) (for
this purpose see the operating manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you are receiving a fax (whistling tone or
silence), you can start the fax reception by pressing ** on the additional telephone.
Changing Code
Changing Easylink Codes!
Changing Easylink Codes!
Change the code only if it is absolutely necessary. The code must begin with * or # .
Press MENU.
1.
Select using [
2.
Confirm with o.
3.
Select using [
4.
Confirm with o.
5.
Using [ select
6.
Confirm with o.
7.
Using [ select
8.
Confirm with o.
9.
10. Enter the new code for starting fax reception.
11. Confirm with o.
12. You can exit with j.
Notice
Switching Off Function
You can switch this function off, if in step 8 you select
using j.
58 ¦ Telephone Lines and Additional Devices · Using Additional Telephones (Easylink)
CAUTION!
RECEPT. SET-UP
appears on the display.
INSTALLATION
.
STATION NAME
appears on the display.
TEL.LINE SETUP
.
LINE TYPE
appears on the display.
REMOTE CONTROL
.
YES
.
NO
, confirm using oand exit