Telephone Lines And Additional Devices; Configuring Telephone Lines And Services - Xerox IF6020 User Manual

office-fax-if-6020-6025-manual-uk-253200935-a.book Seite 55 Mittwoch, 22. April 2009 5:58 17
Telephone Lines and
Additional Devices

Configuring Telephone Lines and Services

DSL Connection
DSL Connection
In the event that you use a DSL modem: Connect the device to the slot intended for analogue
telephones/fax machines! For additional information, please consult the operating manual
of your DSL system. Ask your telephone or internet service provider if necessary.
ISDN Connection
ISDN Connection
Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and there-
fore it cannot be operated directly on an ISDN connection. In order to do this, you need either
an analogue adapter or a connection for analogue terminals. Details for ISDN connections
can be found in the instructions provided with the terminal adapter or the dial-up router.
Selecting the Dialling Process
In some countries you can set the dialling process to pulse dialling (IWV) or tone dialling
(MFV, DTMF tones).
Tone Dialling Disabled
Notice
Tone Dialling Disabled
Use pulse dialling (IWV), only if the tone dialling process (MFV) is disabled for your
link.
Press MENU.
1.
Select using [
2.
Confirm with o.
3.
Select using [
4.
Confirm with o.
5.
Select using [
6.
Confirm with o.
7.
Use [ to select the desired dialling process.
8.
Confirm with o.
9.
Telephone Lines and Additional Devices · Configuring Telephone Lines and Services¦ 55
RECEPT. SET-UP
appears on the display.
INSTALLATION
.
STATION NAME
appears on the display.
TEL.LINE SETUP
.
LINE TYPE
appears on the display.
DIAL MODE
.
8