How To Register User Stamp - Ricoh Aficio 400 User Manual

USER TOOLS

How To Register User Stamp

1
Confirm that the copier is in the ready condition.
2
Press the User Tools key.
3
Touch the keys in the following order.
[Copy Features] key
[Stamp] key
[Next] key
[Register] key of the User Stamp menu
4
Select the user stamp number by
touching a key.
A key with
in it. If you want to overwrite it, follow
the instructions on the display after
touching the key with
5
Place your message on the expo-
sure glass face down as shown
in the illustration. Then, touch the
[Scan] key.
The area that can be registered is 64
mm x 32 mm (2.56" x 1.28") as
shown in the illustration.
Margins from the top and left scale
cannot be registered as shown in the
illustration.
6
Press the User Tools key to re-
turn to the ready condition.
152
has a registered stamp
.
User Tools
left scale
1 mm (0.04")
Guidance
0.5 mm
(0.02")
top scale
32 mm
(1.28")
64 mm (2.56")