Advertisement
interior
19/9/06
• With model CG-306, CG-314, CG-406, CG-412,
when the coffee is made, the coffee jug
will remain hot due to the thermostat
cycle to activate the water heater (7).
• With model CG-416 TH, the thermal jug
(11) will keep the coffee hot even when
you switch off the coffee maker.
• Disconnect the coffee maker by pressing
the switch (12).
• When the jug is empty, unplug the
appliance from the mains and wait
approximately ten minutes for the coffee
maker to cool down before making more
coffee or cleaning it.
6. RECOMMENDATIONS FOR MAKING
A GOOD CUP OF COFFEE
To give your coffee a better flavour and
aroma, we recommend that you use recently
ground coffee.
The coffee should be medium ground and
should not be too fine.
Keep your coffee in a dry place. Once the
coffee packet has been opened, keep it well
closed in the refrigerator so as to maintain
its aroma.
Although the hotplate will keep the coffee
hot, it is best to drink your coffee as soon as
it is made.
7. THERMAL JUG (mod. CG-416 TH)
This jug enables you to keep your coffee
hot.
To open the jug, turn the lid anticlockwise,
release and remove it (fig. 4).
Turn the lid clockwise to close the coffee
maker and use it.
To serve the coffee, turn the lid
anticlockwise with the arrow pointing to the
spout of the jug. After serving, replace the
lid.
16:26
Página 10
8. AROMA CONTROL (mod. CG-416 TH)
Turning this control (8) allows you to adjust
the flavour of the coffee, varying the
strength of the coffee.
Weaker coffee is provided by the
position while stronger coffee is made at the
position.
9. CLEANING THE COFFEE MAKER
Before cleaning your coffee maker, switch
off the on/off button, unplug the appliance
from the socket and wait until it has cooled
down.
Clean the filter holder, the filter, the jug and
the jug lid in lukewarm soapy water, rinse
with clean water and dry the parts before
reassembling them.
All moving parts may be washed in the
dishwasher.
Clean the outside of the coffee maker with a
damp cloth. Do not use detergents or
abrasive products to clean it.
Do not immerse the appliance in water or
run it under the tap.
10. REMOVING LIMESCALE
•
Depending on how hard the water is in
your area and how often you use your
coffee maker, it is possible that the pipes
may become blocked due to the lime
content of your water. This becomes
noticeable when the filtering process
lasts longer than usual. In order to avoid
this, you must remove limescale from the
coffee maker. To do so, you may use
specific limescale removers on the
market especially designed for coffee
makers or else follow the following
procedure:
• Fill the jug with one-part vinegar and
three parts water.
• Pour the vinegar and water mixture into
the water container and operate the
11
Advertisement
