Oven Bulb Replacement; Something Not Working - Electrolux EKG801100 User Manual

14 electrolux
Burners
The burner caps and crowns can be
removed for cleaning.
Wash the burners caps and crowns using
hot soapy water, and remove marks with a
mild paste cleaner. A well-moistened soap
impregnated steel wool pad can be used
with caution, if the marks are particularly
difficult to remove.
After cleaning, be sure to wipe dry with a
soft cloth.

Oven bulb replacement

Warning: Ensure that the appliance is
switched off and DISCONECTED
from power supply before replacing
the lamp to avoid the possibility of
electric shock.
This lamp of 15 W, convection E 14
(230/240V) is a special lamp for "higher"
temperature, up to 300°C. It is supplied on
order.
The lamp is fixed in back of the top back
oven and is accessible from inside.
•
Unscrew the glass lamp protection;
•
Unscrew the lamp;
•
Replace the lamp;
•
Remount the lamp protection.
Reconnect the appliance to the electricity
supply.

Something not working

If the appliance is not working correctly,
please carry out the following checks,
before contacting your local Service Force
Service Centre.
IMPORTANT: If you call out an engineer to
a fault listed below, or to repair a fault
caused by incorrect use or installation, a
charge will be made even if the appliance is
under guarantee.
Burner
cap
Burner
ring
IIgnition